Will my old wiring work with a smart doorbell or thermostat?

Usually yes, but it depends. Smart doorbells need a transformer and chime that can handle the device. Smart thermostats need a C-wire (or a compatible workaround). I confirm compatibility before quoting, and if the existing wiring needs an adapter or transformer upgrade, I call it out in writing up front.

Do you handle the app setup and pairing too?

Yes. The install isn't done until the device is paired to your phone, the test alert, video, or unlock works, and you've watched it happen once. I walk you through the basics so you don't end up with a $300 paperweight.

Can you swap a regular deadbolt for a smart lock?

Yes. Most modern smart deadbolts (Schlage Encode, Yale Assure, August) drop into a standard prep door with the existing strike plate. If the door is older or the latch backset is unusual, I confirm fit from a photo before booking.

Will outdoor cameras need an electrician?

If the camera is battery or plug-in (extension cord through a soffit), no. If it's a hardwired PoE or 120V install with new wire runs, that part goes to a licensed electrician and I handle the mounting and configuration once power is in.

What happens if a device stops working a month later?

Reach out. Most smart-home issues are firmware updates, network changes, or app re-pairing, and I can usually walk you through the fix without a return visit. If the install itself failed, I come back and fix it. No charge. No questions.

Scope · Interior

Smart Home Devices in the Lower Mainland

Set up once. Works the way it should.

Start my quote Send a text

$150 minimum per job
Written scope before work starts
Insured. Registered BC business # 79853 7957

Smart Home Devices

Interior

Line items: 8
Cities covered: 6
Estimate: Written, free

The short answer

What is included

Doorbells, locks, thermostats, security cameras, and smart switches installed, paired, and tested. I am Brody, I do the work myself, and I cover Langley, Surrey, White Rock, Aldergrove, Abbotsford, and Cloverdale. Cost starts at the $150 minimum per job, and you get the price in a written estimate before I start.

Smart-home devices that look easy in the box almost always come with a wiring quirk, an app handoff, or a pairing detail that turns a 30-minute job into a Saturday. I handle the install end to end: mount it, wire it, pair it to your phone, confirm it actually works, and walk you through it. I install smart-home devices across Langley, Surrey, White Rock, Aldergrove, Abbotsford, and Cloverdale. The most common bookings are doorbell cameras, smart thermostats, smart locks, and indoor and outdoor security cameras, but anything with a manual and a power source is on the table.

Free written estimate · Written reply within 24 hours.

Line items

Video doorbell install (Ring, Nest, Eufy, Arlo)
Smart thermostat install (Nest, Ecobee, Honeywell)
Smart lock and deadbolt install (Schlage Encode, Yale Assure, August)
Indoor and outdoor security camera install
Smart switches and dimmers (with neutral-wire confirmation)
Smart smoke and CO detector swap
Smart garage door opener install
App pairing, network setup, and walk-through after install

On this sheet8 items

Questions

What people ask about smart home devices

Will my old wiring work with a smart doorbell or thermostat?
Usually yes, but it depends. Smart doorbells need a transformer and chime that can handle the device. Smart thermostats need a C-wire (or a compatible workaround). I confirm compatibility before quoting, and if the existing wiring needs an adapter or transformer upgrade, I call it out in writing up front.
Do you handle the app setup and pairing too?
Yes. The install isn't done until the device is paired to your phone, the test alert, video, or unlock works, and you've watched it happen once. I walk you through the basics so you don't end up with a $300 paperweight.
Can you swap a regular deadbolt for a smart lock?
Yes. Most modern smart deadbolts (Schlage Encode, Yale Assure, August) drop into a standard prep door with the existing strike plate. If the door is older or the latch backset is unusual, I confirm fit from a photo before booking.
Will outdoor cameras need an electrician?
If the camera is battery or plug-in (extension cord through a soffit), no. If it's a hardwired PoE or 120V install with new wire runs, that part goes to a licensed electrician and I handle the mounting and configuration once power is in.
What happens if a device stops working a month later?
Reach out. Most smart-home issues are firmware updates, network changes, or app re-pairing, and I can usually walk you through the fix without a return visit. If the install itself failed, I come back and fix it. No charge. No questions.

From the guides

Read up before you book

What I tell people who ask about this work, written down.

Areas served

Smart Home Devices by city

Pick your city for how I handle smart home devices there: local housing stock, scope, and the same written estimate.

Related work I do: General Repairs · Painting Services · Drywall Repair

For property managers

If you run units, I take turnovers, deficiency lists and recurring maintenance on a written scope, with GST-registered invoicing and one person to call. How trade accounts work.

Start a trade-account quote

Sign-off

Which devices are already sitting in their boxes, and where does your wifi actually reach?

Pick smart home devices on the form even if you are not sure it fits. Your photos and notes come straight to me, I sort the scope, and the price is agreed in writing before I start.

Start my quote Call Brody

See what a visit covers

Written reply within 24 hours.

I'm on the tools most of the day, so text is fastest. The form gets you a written estimate.

Brody

Brody Robertson · Summit Handyman